The 9x18mm caliber Makarov PM semi-automatic pistol sports several innovative solutions, spawned from an important engineering effort that only preserves a part of the field-stripping procedure out of the original Walther PP/PPK model
Bruno Ardovini
The Makarov PM served countless civilians, officials and governments as a defensive and service pistol ever since 1951... and its shift isn't over yet! Let's take a look at what makes it such a die-hard myth!
all4shooters.com
The Makarov PM pistol was officially adopted by the Soviet Union in 1951
Bruno Ardovini
The front sight of the Makarov PM pistol is machined out of the blank
Bruno Ardovini
A close-up of the muzzle: the fixed barrel fits very accurately within the front end of the slide
Bruno Ardovini
The rear sight is dovetailed in its seat; the upper portion of the slide is checkered to prevent light reflex
Bruno Ardovini
A close-up of the trigger guard; the hold-open release catch is there to be seen, but the trigger pin is integral to the trigger itself, and out of sight
Bruno Ardovini
The ejection window of the Makarov PM pistol is perfectly dimensioned for the 9x18mm-PM case; slide serrations are also very small
Bruno Ardovini
The magazine release catch for the Makarov pistol is located at the bottom of the grip, just under the lanyard ring
Bruno Ardovini
The Makarov PM pistol feeds through single-stack magazines, holding up to eight rounds of 9x18mm-PM ammunition
Bruno Ardovini
The Makarov PM pistol comes with a thermo-setting synthetic grip overlay
Bruno Ardovini
The only screw on the Makarov PM pistol holds the double spring and the grip overlay in place
Bruno Ardovini
The Makarov PM field-strips through a Walther-like procedure, after clearing the chamber and removing the magazine
Bruno Ardovini
Pulling the trigger guard downwards will release the slide from the frame
Bruno Ardovini
The slide can now be pulled all the way back, tilted upwards, and then removed
Bruno Ardovini
The Makarov PM 9x18mm caliber semi-automatic pistol, field-stripped
Bruno Ardovini
A right side view of the Makarov PM pistol: no particularly protruding component is visible here, as all controls are located on the left side
Bruno Ardovini
Makarov PM 9x18mm caliber semi-automatic pistol, seen from the left side
Bruno Ardovini
The Makarov PM semi-automatic pistol in quasi-complete disassembly: the slide and the magazine are left untouched
Bruno Ardovini
The trigger bar, transfer bar and hammer assembly; note how the transfer bar engages the hammer
Bruno Ardovini
The Makarov's typical double spring is immediately visible upon removal of the grip overlay
Roberto Palamà
Roberto Palamà − a well-known gun technician, historian and enthusiast from Italy − provided us with this technical drawing that illustrates the peculiar Makarov double-action trigger system
Bruno Ardovini
Three different machined components are assembled into this very small part: the extractor of the Makarov PM pistol
Bruno Ardovini
The peculiar barrel design of the Makarov PM pistol allows for a flawless chambering
Bruno Ardovini
Hereby, the double spring of the Makarov PM pistol engages the hammer and the sear pin
Bruno Ardovini
63 years after its first introduction, the myth of the Makarov pistol lives on well into the 21st Century!
This advertising is hidden because a third party (Revive AdServer) could potentially collect personal data.Show once.Show advertising permanently.Revoke consent